IMPORTANT INFO & TERMS about Rife Frequency Generators

IMPORTANT DEFINITIONS

WAVE FORMS:   Square wave is for killing pathogens and sine wave is used for regeneration and healing. The BCX Ultra has many other waveforms to choose from for your experimentation. At this time we use the sq. pulse width as the default because we are getting better results with this modified square wave than standard square wave. Many of our clients have reported this.

CARRIER WAVES:  The BCX Ultra has a carrier frequency so that the audio frequency can piggyback (carried) by the RF frequency (the carrier) causing the frequencies to penetrate deeper and farther. RF or radio frequencies above about 200,000 Hertz broadcast very well which is why they are called radio frequencies. Frequencies between 20,000 and 200,000 Hz broadcast to some degree, while frequencies below 20,000 Hz do not broadcast at all. Both the BCX Ultra RF carrier and audio frequency can be set anywhere from 1hz to 4Mhz.There are prestored programs with audio frequencies and carrier wave already set however carrier wave and other settings can be changed if so desired. The BCX Ultra gives you the ability to research and do your own testing.

GATING OR ENTRAINMENT:  This is what we used to call pulse. The previous unit had a pulse rate of about 2/3’s on and 1/3 off. You can use 3.5 Hz to get this same effect. We now use 56.2 Hz as the default in the BCX Ultra.

Abrams who worked with Rife used 3.5-4 Hz for gating. Dr. James Bare, a leader in the field of frequency technology, recommends the 20-30-40 Hz range for gating. It is generally believed that the higher the frequency the higher the gating. Rife’s 1939 instrument, which ran in the MHz range, had a 60 cycle gating.

What is gating? Gating is another form of modulation. The BCX Ultra is modulating 2 frequencies when it plays an audio frequency with a carrier (RF) frequency. In other words, the audio frequency is piggy backed onto a higher frequency. All the time this is happening, the Ultra introduces gating which creates the blink, blink you see  as you play your frequencies.

Entrainment is defined as: “the tendency for two oscillating bodies to lock into phase so that they vibrate in harmony. It is also defined as a synchronization of two or more rhythmic cycles.” This principle of entrainment is universal in nature.

DUTY CYCLE:  The Ultra has a default of 90 percent duty cycle. For many years people ran the standard 50% duty cycle. It is now known that a 90 % duty cycle exposes microorganisms to the frequency for 80% more time than a 50% duty cycle. Do the math. 90% is 80% greater than 50%. It is known that the higher the duty cycle, the greater the coordinative resonance. However, experimenters may choose any duty cycle 1-100 using the Ultra.

What is duty cycle? Duty cycle is how long the frequency is on and off when running a frequency. For example, if running the frequency 100Hz, the frequency is cycling 100 times per second. A 50% duty cycle means that the frequency is on 50 % and off 50% of each second. The 90 % duty cycle means that the frequency is on 90% and off 10% of each second. During the 90% on, it is cycling at the rate of 100 times a second.

GLASS HAND-HELD RAY TUBES:  Hold the glass part of the tubes in the hands, under the arms, or in direct contact with the skin on any area of the body.

GLASS HAND-HELD RAY TUBES & FOOT PLATES:  Generally the glass tubes are used simultaneously with the footplates. This gives more frequency power into the body. Some people prefer to use the glass tubes alone. 

1 comment for “IMPORTANT INFO & TERMS about Rife Frequency Generators

Leave a Reply