How to copy a BCX Ultra preprogram to manual program

Share

How to copy a preprogram to manual program

  1. Press the on/off button to on
  2. Press change- 4 times
  3. Press OK twice
  4. Press next and the 1 is blinking asking you for the number of the preprogram in your manual that you want to copy to manual program. Press in the number you want
  5. Press OK twice and you will see MP 1
  6. Press change+ until you get to the first manual program that says empty
  7. Press OK repeatedly (minimally 6 times) until the screen says copy complete

  How to erase a manual program

  1. Press the on/off button to on
  2. Press change- 5 times
  3. Press OK twice and MP 1 will appear
  4. Press change+ repeatedly until you get to the manual program you want to erase
  5. Press OK minimally 6 times and the manual program you selected will be erased

 Change the master defaults

  1. Press the on/off button to on
  2. Press change- 6 times
  3. Press the OK button repeatedly through all the options to change them to your personal preference
  4. After you have gone through all the option change possibilities press the OK button an extra 6 times to make sure the changes are permanent 

Leave a Reply